SUSTAINABILITY

Designed for permanence, our plaques will not need to be replaced. If replacement is desired, all materials are recyclable.
The plaques are constructed of architectural grade aluminum and attached to a variety of surfaces using steel stand-offs. All materials are REACH and RoHS compliant, and emit no VOCs or off-gassing.

MATERIALS

    We offer plaques imaged through two-processes, depending upon the requirement for both appearance and durability.

  • Ink jet printed color plaques (indoor only) are imaged with water-based inks that are UV-LED cured. UV-LED curing provides a strong bond to
    the aluminum, but requires minimal curing energy.
  • Photographic black-and-white (indoor or outdoor) plaques are imprinted by sealing the image inside of the aluminum. This process results in an extremely durable, high resolution image without using the chemicals required to create signs of similar durability, like etching.
    Both plaques are resistant to damage or scratching and can be cleaned with any neutral cleaning agent (or water).

 


FULL COLOR PLAQUES

metalphoto-cross-section
metalphoto-cross-section
  • Intended For Indoor Installation
  • Portrait or Landscape Orientation
  • Two Sizes: 23” x 35” or 18” x 24”
  • 0.125″ Thick

   BLACK & WHITE PLAQUES

metalphoto-cross-section
metalphoto-cross-section
  • For Outdoor or Indoor Installation
  • Portrait or Landscape Orientation
  • Two Sizes: 23” x 35” or 18” x 24”
  • 0.125″ Thick